Corel Draw X4 working with Rasterlink problems

I am having problems working with the cut file in Rasterlink. The print file is sent over from Corel Draw X4 fine but after it has printed (then removed, laminated) then returned to complete the cut part it throws up an error and won't cut this file. Is anyone else experiencing this as it is a major interruption to the process. I have to go over to Fine Cut to finish this job and I'm not overly familiar with it and have wrecked a couple of jobs due to my ignorance. Has anyone else had any problems. Do I need to update my Corel

Currently I am working with Windows 7, I do most of my work in FlexiExpert and move it over to Corelx4 to print via Rasterlink. Hope someone can help me here. Thank you.

TheSign Guy over 10 years ago

Hello Carol; Make sure the cut line is a Hairline. with no fill and look at how you made the cut line. ( It may need converting to curves. Also the right color.

George
Cancel
Up 0 Down

Reply

Cancel
Carol H. over 10 years ago in reply to TheSign Guy

I didn't know that a colour would make a difference to a frame extraction. I understand if the line is too heavy there may be problems. I am in the middle of a job now so I will check what is happening when I send it to be cut.
Cancel
Up 0 Down

Reply

Cancel
Carol H. over 10 years ago in reply to Carol H.

[08:18:17] Cut Data File Creation Error < { 117442049 } > - [ Can not create mgl file ] - ( 0x08018022 )

OK, this is the error I am getting with any of the files I have printed and then returned to cut in Rasterlink. Can anyone tell me what and why this is happening. I'm glad I don't have 100 of these to do or I'd be wishing there were more than 24 hours in the day.

Is this a Windows problem? I am using Windows 7 with 64bit. and have for the last 3 years.

I've done all the necessary clean ups. Updated the Mimaki Driver CJV30-100 and also found there was a Corel update which helped the transfer from my Corel to Rasterlink.

Thanks for reading.
Cancel
Up 0 Down

Reply

Cancel
Jack Ross over 10 years ago in reply to Carol H.

A quick search on the web shows a very similar problem. http://www.signs101.com/forums/showthread.php?104120-Rasterlink-problem-with-CJV30-160
Cancel
Up 0 Down

Reply

Cancel
Carol H. over 10 years ago in reply to Jack Ross

Very interesting Jack and this is a recent post so quite relevant. I will refer my tech to this post and see what he makes of it.

Hey thank you everyone, this is an annoying problem as I'm sure you will all know. :-)
Cancel
Up 0 Down

Reply

Cancel