I am running Corel Draw 2019 on Windows 10 and have yet come across another mind-numbing issue. I am working in a file just fine, then I perform an action, such as import or transparency, and I get the spinney wheel of death. Go to Task manager and Corel is not responding. Sometimes it will eventually perform the action after an extended period of time (4-5 minuets) or nothing at all. Force quit. Save Auto backup of file when I reopen the program and then every action takes forever, if at all. This is very frustrating. Any insight would be most helpful. Thank you!
I upgraded from X5 to 2019 5 days ago. It will not work. So buggy. Will not open my X5 files. Just sit there with the little circle spinning and spinning and then goes into "not responding" mode. I have tried everything..Uninstalls including removing all corel folders.. repairs..restarts presing F8..with no good results. My X5 still works fine.. My PC has 16GB Ram..Plenty of hard drive space and processing speed..I have even created some very simple files in 2019 and it will open some, but not others. I have been messing with this and wasting time for 4 days now. I have also right clicked the desktop icon and checked for "compatibility issues". Did a test revert to Windows 8 as I am running Windoes 10. STILL no good result. Contacted support via chat last night. Went through recommended steps of renaming CorelDraw 2019 to .old, then doing repair. STILL the same. I've uninstalled the old X5 completely and ran 2019 by itself.. STILL the same. I even bought a new graphics card thinking it was the problem. STILL the same. I have reverted my graphics card driver to a previous version (as seen on a youtube video) and STILL not working. Now I have a ticket created where I sent them my computer MSO.info files as requested and still waiting to hear back. I have project I am working on that is being delayed. I finally just reinstalled my X5 (after removing thinking a conflict existed) so that I can proceed with this project. In addition I received a 'free" version of Painter Essentials 6 and it will not even install. It wants to find the .msi file, saying it is missing. Seems like the network link they sent to me does not work. Also the Font Manager locks up just like CD2019. I tried to simply remove 1 font and it just freezes. I am at wits end with this and have spent way too much time trying to figure this out. I it rediculous that I have to do this. After all isn't it an 'UPGRADE". Seems like a downgrade to me. If this is not fixed very soon, I will ask for my money back and simply use X5. Has anyone else experienced this and found a solution.
donrich said:I upgraded from X5 to 2019 5 days ago. It will not work.
I can understand your situation.And naturally, it is not normal or acceptable. There are some things that catch my attention, for example that Painter Essentials has not worked well either ... it has no relationship with CorelDRAW, so maybe there is another reason. Do you have all the Windows updates installed, including the .NET Framework? I suppose so, but it never hurts to ask.
It also does not open FontManager, which may be another different problem, but it may be linked. How many fonts you have installed? You can use the FontNavigator of X5 to verify it. It is recommended to have few fonts, FontNavigator warns you if it exceeds 400 but the legacy limit of Windows is 720 fonts (although it may have thousands installed, some could doesn't work)
On another topic, although it is not related to it, I talked about Virtual Memory and how beneficial it can be to establish a larger size (it has nothing negative, it only takes up a little disk space). It may not be the specific solution to your problem, but it may still help.
A possible explanation could be related to the fonts. If FontManager monitors the entire disk, the overall performance drops significantly, however if you place the fonts in a single folder, separate from Windows / Fonts of course, the result will be much better. Perhaps there is a particular font that is damaged ... it is impossible to predict.
I remember that in previous versions, a user had a similar problem (the program was blocked at startup) and the solution was to change the default printer in Windows. Sounds strange, I know, but it worked. I know I haven't given you any concrete solution, but at least you have some ideas to try and tell us.
Thanks for your reply Ariel. I am not in front of my PC at this time, but I will try the recommended things. In regard to the Font Manager in 2019. It shows 40 fonts. I had completely uninstalled X5, but reinstalled after finding out that it was not a conflict issue. I do have many fonts installed under X5, over 1000, but it never affected it. When I reinstall X5 all of the 1000 or so fonts are still there, most of which were installed as extra fonts from the X5 cd disk. Is it possible that they are saved somewhere that I did not delete and is still causing a conflict with 2019? even after completely uninstalling X5. I will remove many from X5 and see what happens. This is an additional question I have. Is Font Navigator controlling all fonts on my PC for all programs or is it specific to Corel Draw? Are the Font settings in Font Navigator (X5) overriding the Fonts in Font Manager (2019). If so, should I just have one Font Navigator/Manager installed. To answer some of your questions, Yes, I have updated the .NET framework. I have also done all updates in Windows 10. In regard to virtual memory, I have never had to change it, but am willing to try anything. Can you please provide instructions how to do so in Windows 10? I will also try changing my default printer, although that whole idea seems crazy that it could be the cause!! In regard to the install of the "free" Painter Essentials 6.... The email from CD sent me a download link, when I click it, then save to disk all is fine. When I start the install it informs me that the "network" connection for the .msi file cannot be found.. please insert CD disk or direct to another directory. Well I don't have the .msi file. Should that not be coming from the electronic download/install?
I finally got a reply from my Corel Ticket and the issue is fixed. They advised me to update/repair all of my Visual Studio software, which did not work. The 2nd thing they advised is to create another Windows User Account, which I did and all is working fine now. They must have been some conflict. All is working great now with CD 2019 opening my X5 files. The program now opens very fast and is very responsive. I hope this will help someone else.
I've been using CorelDRAW 2019 for a good while without any issues whatsoever and then for no apparent reason I'm getting lags...the program just stops like hitting the pause button for a few seconds...then it responds! Needless to say it really annoying!
However after reading your post about ...
donrich said:Visual Studio
... I think you meant "Video Studio" screwing up the works it occurred to me this must be my problem as I had just recently installed Corel Video Studio about the same time time I noticed CorelDraw throwing a wobbly.
I'm going to uninstall Video Studio and see what happens and report back.
If this is the case then Corel must send out a notice to users who have bought CorelDRAW 2019 and Corel Video Studio there could be issues and how to solve it.
I believe this fact that Corel has never sent out notices to users regarding bugs or issues is what irritates everyone!
Any Type 1 fonts used in the .cdr file? AND Windows 10 version with Fall Creators Update or later?
For a test, copy the file, remove ALL Type 1 text objects or replace ALL Type 1 text objects with an OpenType or TrueType font.
Reopen test file... Lag gone or still there?
This is also the solution that works to my CD2018 problem. However, it is supper annoying having to switch user accounts just for a software. And what if all of a sudden this user account also creates a conflict with CD?Did you find any more convenient solution?Thanks!
From what I seem to understand, If by creating a new user account, everything seems to work better without any conflicts...it's almost as if Windows was new.Would it also mean that it would be better to have your computer reset to its factory settings, then have all windows' updates installed...then, and ONLY THEN, install Corel2019 for it to work properly?