Hi.
Every time I use cutter (via Corel with WinPlot), cutting will be in same order how the design is made. It means that sometimes when the cutting area is very big, cutter starts for ecxample from beginning and rolls to end, and then back to beginning - depending of how its drawn. Also when I import design from .pdf or .ai or waterer, it remembers the order. And usually in the middle vinyl crashes.
Is there any suggestion what to do with design. I've tried everything: export/import, brake apart, combine ... etc.
Thanks
I work with several lasers that cut objects from the bottom to the top of their order in the Object Manager. YOu could see if your plotter interrupts things that way
Hi
I don't use this but a friend of mine does for several machines it's about 80.00 or less but saved him a tone of time. It's fast at redoing the cut patterns
James Leonard's Artwork Optimizer Standard - 32 Bit or 64 bit You can get it at
www.macromonster.com
Ross Blair
Hello Sarvilinrekas; Back when cutters first came out they had a Hot Knife to cut the vinyl with and the programs were designed not to cut to objects that are close together, and some of the drivers have followed the same pattern of cutting. With some drivers you can change it, you could call the factory that made the driver and ask.
George
My favorite solution. I highly recommend it
http://www.cocutusa.com/
Only $199 for upgrading to CC PRO 2011 from ANY older version, even 10+ years older!
Talk to
Jim Doggett or Jack Wiley. Customer service is friendly, excellent, and sets a standard.
~John
I found solution: I opened this file in Illustrator- Select all - (Objects) Expand. After that plotter cuts line by line. Very helpful because my cutting length is over 5 meters. Thank you guys anyway :)