Hi,
I use a camm-1 with Roland's own print driver
Objects need to be represented by hairline outlines only, nothing can have a fill applied.
try cutting the attached file.
eoinie said:Hi I am trying to cut vinyl on a Roland Camm-1 from drawings I'm producing in CorelDraw12. I've managed to do it once but it was luck after many tries - now I can't remember what I did. If I trace it from a drawing it comes out on the monitor perfectly and looks ready for cutting, but when I go to print it just starts the machine but won't move. The plotter works fine on the native Dr. Stik software that shipped with it but this is dreadful. Can anyone help me out? Thanks in advance
Hello to all,
This is an old thread & I am a new member. I have had my plotter, Camm-1 24", for than 15 years. It has been maintained by me mainly.
Had several specific cutting programs, Signmate, Pro cut, etc... After speaking to my brother & the plotter coming to me(it was sitting in a corner at brother house) he stated that i could cut directly from Corel Draw. Here are my specs, XP pro, have serial & LPT cables, Dongle for old programs(no programs), Corel Draw 11, downloaded software from roland & it is in the printers section. Here is exactly what happens; letters or art is in line art & is converted to curves, hair line, one color to make it easy... Ctrl P & i preview it & it is top center on the page & hit the print button and this is the what the plotter does;
the fan comes on & then the plotter moves to a specific X & Y coordinate and stops at that point & does nothing else..
What could be the problem? Checked printer settings, plotter settings, I exported to plt & got fed up after several hours of reading this forum & others.
Please help me with this issue.
Thanks in advance...
P.
Hi All,
I'm brand new to this forum. I got here trying to find out how to do exactly what you guys are trying. I realise that the thread is pretty old but I found it and this may help others.
For years I've been using an old DOS programme to drive my Roland Camm1 PNC1800 but it only worked from Win98 so I had to run a dual boot system and boot into 98 for cutting.
Times change and I decided to learn how to plot (cut) direct from Corel X4.
Here's what happened. I downloaded the latest driver from Roland for XP and installed it. Tried a test cut and exactly what happened to Predator happened to me. The fan started and the cutter moved to the centre of the sheet and then stopped.
O.K. RTFM. Read the instructions that came with the driver <README.TXT> - follow instructions and it works perfectly.
The main point that made the difference was disabling the <Rotate 90 deg.> command on the plotter itself. For years I've done my drawings in a CAD programme for plotting and worked to a "landscape" format which required the plotter to be set at <Rotate=90 deg> (this is covered in the <README.TXT> file).
Follow the other instructions in the file relating to page size etc. and you cannot go wrong.
I hope this helps someone else.
Jerry