Hello.
I have just purchased CorelDraw X5 Home & Student because I expected some improvements over PhotoPaint 11 SA, which I was using before. The main reason was the announced multi-core support, which would - in theory - greatly benefit from my new 4-core computer (Win7 64bit).
I still have version 11 installed, so I compared it to X5. First I was amazed of how little has changed in the 8 years between the two versions. But I think I should start another thread about this; let's focus on multi-core support. I will mainly be talking about PhotoPaint, because I don't use CorelDraw and the other tools much.
In general there are two possible reasons to implement multi-treading in a software:
1. Classical multi-threading: Used to make the user interface responsible while the program is doing some work in the background. In this case the program performs two or more totally independent tasks. This even makes sense if there is only one CPU core.
2. Support of multiple CPU cores: A single function within a program is split up in order to be processed in parallel by all cores. The purpose of this is to reduce the time required to process one task.
The first kind of multi-threading was already implemented in version 11 or even in older versions (I don't have them installed now so I cannot test). For example you can work on a second file while the first file is saved or while a complex bitmap filter is calculated.
Now we live in the age of multi-core CPUs, and if a program is advertised with "more speed with new multi-core support", this usually refers to the second kind of multi-threading, while the first kind is taken for granted.
I installed a tool to display the work load of each of my four CPU cores, and then I checked how many of the funktions in PhotoPaint X5 can put 100% (or nearly 100%) load on all cores. With this method it is only possible to detect multi-core support if a feature in the software needs much time (at least a few seconds) to finish. But fast features requiring only a fraction of a second aren't of interest here, because the user wouldn't notice the difference between single-core and multi-core support anyway.
Here my results:
Painting with a very large brush: no multi-core support.
Apply about 50 of the approximately 100 bitmap effects: Only one (Stained Glass) has detectable multi-core support!
Corel Draw: create two objects with gradient fill and apply the blend tool to create a progression of intermediate objects. The rendering of the result takes about two seconds and does not make use of multiple cores.
Corel does not list the exact features which have multi-core support, but I found a few hints in the forums:
- Saving of files. This was already available in previous versions, as I mentioned above.
- Printing. Can't say anything, I never ever printed with Corel. Probably the same applies as to saving files.
- RAW import: Never did that either.
- Bitmap filters: That's a plain lie. It is true for a small percentage of the filters only.
Some users may be happy about the faster RAW import, but some of the most time consuming functions (vector graphics rendering and bitmap effects) don't run faster in X5.
In my opinion the user benefit of the current multi-core implementation is very close to null.
Or did I miss something? I wouldn't want to believe that the developers at Corel are lazy and the marketing guys are liars ;-)
Any other opinions about this?
Hi,
post your system specification here :--
CPU
Memory
Power Supply
Harddisk
Mainboard
Graphics Card
Thanks
Simon Yee
Simon Yee Choong Yein said: post your system specification here :--
CPU: Intel Core i5 760 4x2.80GHz
Memory: 4GB DDR3-1333 CL7
Power Supply: Electric power I suspect
Harddisk: Hitachi 1TB
Mainboard: Gigabyte GA-P55-USB3, Intel P55 Chipset, Socket 1156
Graphics Card: AMD Radeon HD 5570 1024MB DDR3 PCIe
You see, it's an ordinary quad-core system with Win7 64bit running on it.
Huh
what brand is that power supply?
does it come along with the casing?
Check your power consumption here :-
http://www.extreme.outervision.com/PSUEngine
and then look at the power consumption
The power supply is not a good brand, and rating is lower than what is published.
At this moment with the specification you send me you are running just about 225 watt
please go and calculated again in the website and check how much really you are using.
It is a problem with underated power supply that will cause a system slow down, blue screen error, crash software, intermittent operating system error,
overheated cpu, noisy fan, failing hard-disk performance, unstable usb interface, bulging capacitor, and all in all shorten hardware lifespan.
I know the system is still very new but unfortunately the person who sold you the system, parts and component did not take time and patience to inform you the problem you will face.
So take action now to replace the power supply as soon as you can before the worse will happen.
Hi Simon,
you seem to have an obsession with power supplies, LOL. I realise that the power supply is a very important component in a computer and ratings are often exagerrated or shown in Peak Watts instead of RMS, but this is not relevant to this post. Very few things in X5 seem to make use of multi-core processors and this has nothing to do with power supplies.
Best regards,Brian.
Please do not think for one moment that it is not important
because this Power Supply: Electric power I suspect
is not good news.
It reflect what is working and what is not
this not about RMS or PMPO but a stable power supply is like a difference of putting a good work heart or a bad heart into your body.
It either will kill the person or not.
cheap power supply will not help your work and your job is not there to repair the computer but to get your creative design out for your study on time and perfect everytime.
you will be sorry if every day you have to fix the pc instead of creative design.
And buying a MAC is not an option but a suicide
I already acknowledged that a power supply is a very important component in a computer, it was the first thing I said. However, the best power supply in the world is not going to add "features" to CorelDraw. X5 has little support for multi-core processing, so what is a better power supply going to do about that?
HI.
Interesting thread. It has gone in directions no one has gone before. ~Theme from Star Trek playing in the background....
-John
Yes. All this just because my computer runs on anti-matter
Simon,
I didn't think that the hardware was important in a discussion about software features, so I made a joke with the power supply, and I forgot to add a smiley. Actually my power supply is a "be quiet Straight Power 450W ATX 2.3", which wasn't cheap and which gives me the option to replace my slow graphics card by a high end graphics card.
Hello Omawetterwachs; I think you have a good system, I would have thought Corel would have bilt a program in 64 bit that would use everything the computer has. Corel was one of the first programs that had to have Windows to run. And remember dont strain your power supply, feed and fan often!!!!!!!!
My Thoughts George
TheSign Guy said:And remember dont strain your power supply, feed and fan often!!!!!!!!
I'm guessing you're not running an Anti-matter power supply yet George. These are of a new generation of power supplies. They don't require food and give off very little heat. Also programs can tap into their power and modify function on the fly.
Look into it. I think it would be a huge production boost for your business.