Hello ladies and gents,
I work in a print shop. We do a lot of work with a printing press as well as our digital machines. Whenever we design something digitally that has grayed areas or logos, and we want to print it using our press, we need to make sure the shaded areas have "dots" so that the ink from the press will spread evenly.
In CorelDRAW X4, I used to to have it sent to the general PANTONE uncoated palette. After selecting the gray area, I would double click the color box at the bottom right, bringing up the fill window. From here, I selected the Options drop down menu, then PostScript Options. Here I could set the dots and the frequency.
Now that we've updated to CorelDRAW X5, the palette options are quite different. I want to have one centralized PANTONE unocated set that stays for everything I work in. And the big problem, is that when I do find a good gray to use (after clicking through way too many choices), the PostScript Options is grayed out and can't be clicked on.
Is there someone that can help with this? It is very necessary for our business and any assistance would be much appreciated.
-Tyler
omega1227 said:when I do find a good gray to use, the PostScript Options is grayed out and can't be clicked on.
Ensure you are sending to a Postscript printer in order be able to globally adjust screening.. Then....
joan said:"Halftone Type" (bottom of the last picture) is where to change the dot (I think that was his original request). My question is, wouldn't you have to print seps in order for that to work? Does anyone other than screen printers ever print seps anymore?
I believe the original post is not relative to the Print menu, because he talk about the Fill menu, when you use a Pantone color you have an option called "Postscript options". And it seems that the problem is the use of a wrong color palette, because you can use the same palettes of X4 (there was a lot of pantone palettes, but only a few are the most common used, such as "Solid Coated" or "Solid Uncoated") if you sue a different color palette this option is unavailable
joan said:"Halftone Type" (bottom of the last picture) is where to change the dot (I think that was his original request).
When I read his post, it seems he just wants to print default circular halftone dots.
joan said:My question is, wouldn't you have to print seps in order for that to work?
Yes, but IMO this is much more practical than choosing special halftone dots... angles... or screening values on a per-object basis
joan said:Does anyone other than screen printers ever print seps anymore?
Offset printing still uses halftones, often at a much higher line screen than screen printers.
However, I actually output at 75 LPI for some offset jobs still; since one place I freelance as is very old-school and they still shoot art with a camera to create film. We send some jobs out for film.. depending on art.