Hi
Is it possible to get the line thickness down of the calligraphic and/or pressure tools in artistic media? The minimum thickness seems to be .762mm (2.16 pt or 0.03"). I use a Wacom Intuos 3.
Thanks, Colin
With the page set to 300dpi, I can get the line thickness down to "hairline" which is lower than the lowest value of 0.5pt
... maybe try this...
menu, layout, page setup, resolution
change it to 300dpi
hit okay
then go to the objects properties docker or at the top and change the line thickness to whatever.
Another thing to try, is (after doing the above) typing 0.1 into the pen thickness edit box and hitting enter... on my computer, that takes the line thickness down to about half the thickness of "hairline"
However, if it's a problem with the pressure reading from your tablet, try redoing the calibration IN DRAW, but only press about half as hard.
Hi Davoid
Thanks for getting back. i'd already tried everything you suggested and always work at 300dpi anyhow. I've recalibrated the pen settings several times; pressing so lightly that it barely recorded a line!
I've attached a screenshot of the stroke width box, which I cannot get any lower than .762mm.
Any further help much appreciated.
Thank, Colin