CorelDraw x6.1 problems

It is strange to see that how transformations dockers still show anonymous behaviour.

1. I prepared a 57 mm square, proportionally resized it to 58 mm and applied enter for the change but it remained as is i.e. 57 mm sq. Next I made the same changes through property bar, it worked. Through further experiments I observed it only make transformations through enter if we give x=val and move to y=val through tab and press enter. Or if we directly give new value to y and press enter. The property bar doesn't has this problem.

2. Transformations dockers problem of showing wrong position on y-axis. Screen shot attached.

3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key. This problem remains as is from v16.0.0.707.

4. Printing -  EPS with CMYK / Native colour management shows graying problem on RIP. Facing it as a major problem. 

Problems encountered even after resetting through pressing F8 at startup.

Thanks,

with regards,
Anil.

Details:
CorelDraw Graphics Suit x6  v16.1.0.843
System config. : Intel Core2 Quad Q8400 2.5GHz,  DG41 ID, DDR2 800MHz 8GB, SATA-II HDD 500GB
OS : Windows 7 64bit Ultimate v6.1.7601 SP1 Build 7601